WeCreat Lumos Ultra vs xTool F2 Ultra: Which UV and MOPA Setup Should You Buy?
I spent a month with the WeCreat Lumos Ultra. Here is how its UV and MOPA combo compares to the xTool F2 Ultra, and why xTool needs two machines.
Read More >>Crafting made easy with step-by-step guides and tutorials
Laser Engraving
Laser engraving posts, projects, machines, ideas, and inspiration
WeCreat Lumos Ultra Review: Two Lasers in One Machine
I tested the WeCreat Lumos Ultra for a month: 3D portraits inside crystal, full color stainless steel, clear glass with no coating. Honest UV and MOPA review.
Read More >>
xTool M2 Review: Can One Machine Replace Your Cricut, Laser, and Printer?
My honest xTool M2 review after 7 real projects. See if this print and laser combo can replace your Cricut, laser, and inkjet printer.
Read More >>
Using a Laser Cutter for Stickers: How It Compares to a Cricut
I used a laser cutter for stickers and compared it to the Cricut print then cut method. Here is the workflow, the real cost, and which one I would pick.
Read More >>
Laser Engraving Leather: Genuine vs Fake Leather (I Tested Both)
Laser engraving leather looks amazing on genuine hide and terrible on fakes. See my Temu flask fail vs real leather wallet win on the xTool M2.
Read More >>
Laser Cut Felt Ornaments: How I Made a Layered Basketball Ornament
Learn how to laser cut felt with the xTool M2. I made a layered basketball ornament, plus my painter's tape hack for stubborn white felt.
Read More >>
Laser Cutting HTV: How I Made a Shirt with Laser-Safe Heat Transfer Vinyl
Laser cutting HTV is possible with laser-safe heat transfer vinyl. See how I made a memorial shirt on the xTool M2, plus mirroring and test cut tips.
Read More >>
Laser Cutting Vinyl: How I Made a Wine Glass Decal with the xTool M2
Learn laser cutting vinyl safely with the xTool M2. Make a wine glass decal with laser-safe adhesive vinyl, plus weeding and curved-surface tips.
Read More >>
Laser Cut Bookmarks: How I Cut Glitter Cardstock with Zero Scorch Marks
Make laser cut bookmarks from glitter cardstock with no scorch marks. See how I cut delicate paper on the xTool M2 without a sticky mat.
Read More >>
How to Make Stickers with a Laser (One Machine, Start to Finish)
Learn how to make stickers with a laser using the xTool M2. Print then cut in one machine with no inkjet, no registration marks, and no sticky mats.
Read More >>
How to Make a Full-Color Laser Cut Name Puzzle (No Painting Required)
Learn how to make a full-color laser cut name puzzle on basswood with the xTool M2. Print the colors, cut the pieces, and skip the painting!
Read More >>
Laser Cutting Paper and Cardstock: Clean Cuts, No Mats, No Scorching
Yes, a laser cuts paper and cardstock cleanly, even glitter cardstock, with no mats and no scorching. Here's how to set it up right.
Read More >>
